Ukraine Import Data of Rear End Plate | Ukraine Import Statistics of Rear End Plate

Find latest 2017 Ukraine import data of rear end plate collected from Ukraine customs. Check Ukraine trade statistics of rear end plate imports.
 

49 Records (Demo)

Import Shipment Records Found

Select Date

DateHS CodeProduct DescriptionOrigin CountryQuantityUnitNet WeightTotal Value [USD] Importer Name
29/Apr/20178433510000"1. samohidnyymarky harvester John Deere, notcontains that incorporates transmitters tapryymachi: Model S670 COMBINE, novyy.Seriynyy (identification) number / nomer1Z0S670APHB106164, number dvyhunaRG6090G025866. Calendar year 2017rik.Modelnyy 2017rik.Komlektatsiya year: 0166 Made-to Ukraine, 0433-manual in Russian; 0507 package for cereals; 0600-No package; 1101-Cab Deluxe, 1220-seat on pnevmopodushtsi, 1370-Standard package lighting 1411-Preparations for the installation of the receiver, the 1600 fire extinguisher missing , 1803-Training to AutoTrac with Harvest Monitor, Monitor 1823 GS3 Command Center 7 in. (17.8 cm) Color Display; 188J-JDLink Connect - 1 year, 50 hours JDLink Access.1950-No Harvest Mobile; 2057-3-speed transmission, 2220- front-wheel drive, 3054-Increased driving system with variable speed, 4300, small grain concave wire; 4832 Upper sieve-sieve and dual control system; 4885-rotor configuration of Va riable Stream; 5232-standard system of grain transportation, 5373- Electric drive assembly grain hopper, auger Vyvantazhnyy-5425, 5756-system grinding crop residues Deluxe- straw spreader PowerCast, 6410, Manual rear coupler; 6648-500 / 80R28 IMP 176A8 SFT TL (MITAS) - width 3.45 m; 6777-IF800 / 65R32 CFO 178A8 (only Michelin) - width 3.80 m; 7714-Special Transport sticker, 8133-Right exterior mirror, 8525 -Nyzhniy protection fan and auger; 8649-pneumatic compressor installed from the factory; 8701, engine block heater - 220 volt8709 fuel separator posylenyy9049 Directory spare parts; 9425-concave rod increased wear resistance, large wire-9427 concave; 9433-Sectional overhead concave plate; 9435-Overhead concave plate, 9663-preferred brand Michelin, 9665-preferred brand Mitas - rear tire, wheel spacers 9669, 96 mm at the front wheels, Brand: Deere & CompanyTorhovelna Brand: JOHN DEEREKrayina production: DE "GERMANY1UA20401019100192558.4671 ***** 16 More Columns Available along with Company Name and Other Details etc.
28/Apr/201773201011001.Resory sheet, plate, polueliptychnoho type produced in the hot state spring steel for motor vehicle bus ZAZ type A07 chassis TATA LP 613/38 (Euro-II): rear spring to collect 264132400110-16sht, back in the spring 264132400110-16sht collection, back in the congregation 264132400110-16sht spring, spring back to collect 264132400110-16sht, front spring in the collection of m'yakymprohynom -8sht, front spring in the collection of m'yakymprohynom 264332100107-8sht, complete with front resorau m ' which 264332100107-8sht bending, the front spring in the collection of soft deflection 264332100107-8sht, front spring assembly in the normal deflection 2643321001 09-8sht, front spring assembly in the normal deflection 264332100109-8sht, front spring assembly in the normal deflection 264332100109-8sht, front spring assembly in the normal deflection 264332100109-8sht.Vyrobnyk TATA MOTORS LIMITED. Trade mark TATA MOTORS. Country of IN. .INDIA0UA112080716018142.09377 *****
28/Apr/20178703239033"1. The car with an internal combustion engine with spark ignition with crank mechanism (petrol), which was in use - 1am: Brand Car - BMW; Model car - X5; body number (VIN) - 5UXZV4C51DL992966; engine room - no data number chassis - not available, the total number of seats, including the driver - 5; purpose - to transport people; cylinder capacity engine - 2979sm3, power output - 225kVt, axle configuration - 4x4, calendar year ( release) - 2012., model year - 2013., body type - niversal, color - white, Car damaged, whack, broken and damaged, door front right, inner lining the front right door fixing belt safety front right, door rear right, center pillars complete with threshold right pad right, hinge supports right module controls the right side impact, head airbag Passenger front, rear head airbag Passenger, pass the security front right, rear right security pass, inner lining the roof, plastic plate right rear arches on dkrylok right rear arches. Scratches, dents, chipped around the perimeter of the container body avtomobilya.Vyvantazheno MSKU0669727. Trade mark - BMW. Manufacturer - BMW. Country of origin - USA, US. "UNITED STATES1UA5006302249.8210269.99991 *****
28/Apr/20178703239031"1.Poshkodzhenyy, passenger vehicle to transport people and for the use of public Podoroga engin Mr. iskrovym internal combustion and ignition of the crank mechanic nizmom (petrol) was uvykorystanni brand HONDA, model CR-V - 1pc. Engine Room - no data, according to expert opinion №6216 28.04.2017r .: stamp "" Honda "", model "" CR-V "", in the configuration "" EX-L "" VIN 5J6RM4H74FL053452 engine room - no data, typdvyhuna - petrol, V-2354sm3, power - 140kVt environmental class - Euro 5, the total number of seats, including the city istse driver - 5 calendar rikvyhotovlennya - 2015, model year - 2015, the body - wagon, wheel formula 4x4, color - black. vehicles damaged. According eksperta№6216 conclusion of 28.04.2017r., damaged and should be replaced: • by data [3] naavtomobili necessary to replace the front suspension right (poz.7054, 7082, 7088, 7102, 7106, 7118), the front suspension subframe (7011), with vidkolesa front right (7036), ABS sensor front right wheels (7246) , front suspension stabilizer law (7272), the thrust steering rights (7312), crankcase engine (8065), in Pop trumpet average (8826). • front bumper (0283) strain in right and left parts to form bends, cracks materialukriplen, be replaced. • the lower part of the front bumper (0282) - in praviychastyni schesa material (according to [8] repairs not provided) must be replaced. • Protection of the lower front bumper (0835) - on the right side schesa material (according to [8] repairs not provided) polezhytzamini. • grill grille (0424) - on the right side vidsutniysektor (according to [8] repairs not provided), lie down replacement. • oblytsyuvannyahromovana grille (0437) - crack the material (according to [8] unexpected repair), lie down replacement. • headlight Law (0562) - cracked material fasteners (according to [8] repairs not provided), lie down replacement. • wing front right (0742) - it is difficult to form misshapen dents, creases metal polezhytzamini. • Cover the front right wing (0788) - schesa material (according to [8] repairs not provided), lie down replacement. • Protection of wheel arches perednohopravoho (0842) - crack the material at the bottom (according to [8] unexpected repair) must be replaced. • Hood (0471) in front of a deformed with formation of dents metal beyond repair and then color • dveriperedni law (1482) - in the back of the door frame deformation, polezhytzamini. • stable central sidewall Right (2292) seredniychastyni deformed in the form of dents, bends metal, with podalshymzabarvlennyam be repaired. • resistant front right sides (2238) in seredniychastyni deformed to form dents metal beyond repair and then color. • lining the lower right rear door (1986) in front of a deformed with formation of cracks material (according to [8] repairs not provided) pidlyahayezamini. • plate glass exterior rear doors "UNITED STATES1UA80719021007737.819847 *****
27/Apr/20177326199090"1. The products of stainless steel, stamped without further processing: - plate vytysnyuvacha stuffing, article 286595 in the amount of 1 pieces. It is soboyurozsuvnu right front leg, which is part of the automatic double klipsatoraSP 18/15 (Clipsators designed for packing sausages) , intended to supply a unit klipsuvannya and holding the button sausages during zatyskuklipsy, as well as its movement after surgery upakovky.- plate vytysnyuvacha stuffing, article 286596 in the amount of 1 pieces. it is soboyurozsuvnu right rear leg, which is part astynoyu dual automatic klipsatoraSP 18/15 (Clipsators designed for packaging sausage), intended to supply a unit klipsuvannya and holding the button sausages during zatyskuklipsy, as well as its movement after surgery upakovky.- plate vytysnyuvacha stuffing, article 286597 in the number 1 pc. It is soboyurozsuvnu left front leg, which is part of the automatic double klipsatoraSP 18/15 (Clipsators designed for packaging sausage), intended to supply a unit and holding the button klipsuvannya cowboys asnoho product during zatyskuklipsy, as well as its movement after surgery upakovky.- plate vytysnyuvacha stuffing, article 286598 in the amount of 1 pieces. Predstavlyaetsoboy razdvyzhnuyu zadnyuyu lion paw, kotoraja there chastyu dvoynohoavtomatycheskoho Clipsators SP 18/15 (Clipsators prednaznachena for upakovkykolbasnыh of products) prednaznachena for submission to the node klypsovanyya and uderzhanyyabatona Kolbasna Fixing IN TIME klypsы clips, as well as ego Peremeschenye poslezavershenyya packaging operations. Material: Stainless steel. Method of manufacturing: stamping. Company manufacturer: "" Tipper Tie Alpina "". Trademark: "" Tipper Tie "". Country of origin: (CH) Switzerland. "SWITZERLAND0UA1002001.2732.2329082 *****
27/Apr/20177326909490"1.VYROBY ferrous metal stamped: FOR MACHINE TYPE HB # 0908584: - ART. 31 September 0700 LOWER STEEL CHASTYNANAPRAVLYAYUCHOYI chain, is a rectangular plate dimensions 96 * 815 MMTOVSCHYNOYU 10 mm intended for attachment to the frame easel in the manufacture of the workpiece to PARQUET -2SHT, art. 09 33 2100 STEEL delighted chain conveyor, is a plate of 60 * 40 * 30 mm to 10 mm with a hole in the center, designed for mounting to a chain -4 VT planers FOR TYPE VH-120 number 1908220: - ART.39 47 2600 grooved ring for pressure rollers - 3 pieces. With slot groove for POSA CI external to the shaft. DIAM.150 MM internal. DIAM.100 mm, 30 mm, is designed for pressing and transporting Parquet billets on the table in the processing area FOR planers - FOR MACHINE TYPE PAKUE number 208394 -120: - ART.02 67 2600 ring for smooth feeding roller -1 units. From filling the slot for landing on external shaft. DIAM.100 MM internal. DIAM.30 mm, 30 mm, is designed to press AND Tran SPORTUVANNYA Parquet billets on the table in a zone handling for planers - ART.02 67 2500 grooved ring for pressure VALYKIV- 3 pcs. From filling the groove for planting in Val external. DIAM.150 MM internal. DIAM.30 mm, 30 mm, is designed for pressing and transporting Parquet billets on the table in the processing area FOR planers - for machines TYPE S-4. # 5011146: - ART.50 15 2013 Mechanical SET BEFORE steel plate saw blade, is the plate 210 * 60 * 10mm with two holes O6 FOR FIXING-2 units used as PRYZHYMNA slats under which glides PROCESSING - ART 50 15 2200 LEFT lateral sides, is a plate of 185 * 30 * 10mm with two holes O6 FOR FIXING 2 PCS is used as PRYZHYMNA slats on which slides ZAHOTOVKA- ART. 50 15 5600 BASIS rear LIVAYAVLYAYE a rectangular steel plate 100 * 1180 * 10 mm, with six holes O10MM the center for attachment to the frame easel on the left, 2 pieces used for SLIDING piece in OBROBKY- AREA ART. 50 15 5700 POLZUNOK ZZADNIY, right, is a rectangular steel plate 100 * 1180 * 10 mm, with three holes O10MM for attachment to the frame easel on Human VT-2 - ART. 5000 50 15 Supporting plate beneath the slider, right, is a rectangular steel plate 350 * 250 * 10 mm with two holes for attachment to O10MM frame easel on which in turn are fixed PRYZHYMNI moving line of -2 PCS MANUFACTURER "" GEBR.SCHRODER GMBH & CO KG "" Country of Germany DE "GERMANY0UA20607052.054343.299055 *****
26/Apr/20178433510000"1. samohidnyymarky harvester John Deere, notcontains that incorporates transmitters tapryymachi: Model S670 COMBINE, novyy.Seriynyy (identification) number / nomer1Z0S670ACHA106210, number dvyhunaRG6090G025924. Calendar year 2017rik.Modelnyy 2017rik.Komplektatsiya year: 0166 Made-to Ukraine, 0433-manual in Russian; 0507 package for cereals; 0600-No package; 1101-Cab Deluxe, 1220-seat on pnevmopodushtsi, 1370-Standard package lighting 1411-Preparations for the installation of the receiver, the 1600 fire extinguisher missing , 1803-Training and the AutoTrac with Harvest Monitor, Display 1825 GreenStar; 188J-JDLink Connect - 1 year, 50 hours JDLink Access.1950-No Harvest Mobile; 2052-3-speed transmission, 2220, front-wheel drive, 3054-Increased driving system variable speed, 4300-Small grain wire concave; 4832-upper sieve and sieve with dual control system, 4885-The configuration of the rotor variable Stream; 5232-standard system of grain transportation; 5373-Electric drive assembly grain bin; 5426-Vyvantazhnyy screw from removed housing that is mounted dealer length 6.9 m, 5756-system grinding crop residues Deluxe- spreader Sol We PowerCast, 6410, Manual rear coupler; 6648-500 / 80R28 IMP 176A8 SFT TL (MITAS) - width 3.45 m; 6777-IF800 / 65R32 CFO 178A8 (only Michelin) - width 3.80 m; 7714-Special Transport sticker, 8133-Right exterior mirror, 8525 -Nyzhniy protection fan and auger; 8649-pneumatic compressor installed from the factory; 8701, engine block heater - 220 volt8709 fuel separator posylenyy9049 Directory spare parts; 9425-concave rod increased wear resistance, large wire-9427 concave; 9433-Sectional overhead concave plate; 9435-Sektsyiyni concave cap (set of three); 9663-preferred brand Michelin, 9665-preferred brand Mitas - rear tire, wheel spacers 9669, 96 mm at the front wheels, Brand: Deere & CompanyTorhovelna Brand: JOHN DEEREKrayina production: DE "GERMANY1UA20401019100191962.6299 *****
26/Apr/201787141000001. Parts and devices mototsykliv.-art.2S3-23135-00 plug front fork, motorcycle -1sht. art.4B1-15113-00-metal-plate-1sht. art.2BS-12210-01 timing chain tensioner, motooleru -1sht.-art.5EB-23125-00 plug front fork, metal, motorcycle -1sht.-art.5VY-22151-10 Overlay marine plastic chain, rear pendulum motorcycle -1sht.-art.4GY-22151-00 Overlay marine plastic chain, pendulum--1sht. art.5VU small weight-17632-00 CVT--1sht. art.5VU-17653-00 Slider variator plastic -4sht. art.90891-20300-mounting kit steering, black MT / FZ09 , XSR900 -2kompl.-kit for art.90891-20303 riplennya steering, MT09 / FZ09 (2017) -1kompl. art.90891-20301-mounting kit steering, titanovyy MT / FZ09, XSR900 -3kompl. art.90891-20302-mounting kit steering, MT09TR / FJ09 -4kompl.Krayina production - JPTorhovelna mark - YamahaVyrobnyk - Yamaha Motor Europe NV.JAPAN0UA1251804.489273.6908974 *****
25/Apr/201787079090001.Povnistyu equipped double cabin with integrated truck frame DAIMLERCHRYSLER brand, model - 213 CDI, WDB9026221R198635 body identification number, a number 1 thing the calendar year 2000, used, body type flatbed truck, number of doors - 3. at no body assembly, engine in the assembly, front and rear suspension, transmission, exhaust system, transmission, ignition system, fuel system, fuel tank, fuel pump, battery, front and rear lighting with frets, front, rear direction indicators, expansion tank cooling system, radiator, steering wheel, steering rack, air conditioning, plate measuring devices. .GERMANY1UA20603015002343.167878 *****
24/Apr/201785087000001.Povnistyu staffed body truck brand MERCEDES-BENZ, SPRINTER model, body WDB9036631R887382 identification number, a number 1 thing the calendar year 2006, used, body type, cargo refrezhyrator, door number 5. On the back there are no assembly, engine in the assembly, front and rear suspension, transmission system exhaust, transmission, ignition system, fuel system, fuel tank, fuel pump, battery, front and rear lights, front and rear boards turns the cooling system expansion tank, radiator, steering wheel, steering rack, air conditioning, plate measuring devices. .CHINA0UA10012027634.5000408 *****
  • Shipment Record 1
    Date
    29/Apr/2017
    HS Code
    8433510000
    Product Description
    "1. samohidnyymarky harvester John Deere, notcontains that incorporates transmitters tapryymachi: Model S670 COMBINE, novyy.Seriynyy (identification) number / nomer1Z0S670APHB106164, number dvyhunaRG6090G025866. Calendar year 2017rik.Modelnyy 2017rik.Komlektatsiya year: 0166 Made-to Ukraine, 0433-manual in Russian; 0507 package for cereals; 0600-No package; 1101-Cab Deluxe, 1220-seat on pnevmopodushtsi, 1370-Standard package lighting 1411-Preparations for the installation of the receiver, the 1600 fire extinguisher missing , 1803-Training to AutoTrac with Harvest Monitor, Monitor 1823 GS3 Command Center 7 in. (17.8 cm) Color Display; 188J-JDLink Connect - 1 year, 50 hours JDLink Access.1950-No Harvest Mobile; 2057-3-speed transmission, 2220- front-wheel drive, 3054-Increased driving system with variable speed, 4300, small grain concave wire; 4832 Upper sieve-sieve and dual control system; 4885-rotor configuration of Va riable Stream; 5232-standard system of grain transportation, 5373- Electric drive assembly grain hopper, auger Vyvantazhnyy-5425, 5756-system grinding crop residues Deluxe- straw spreader PowerCast, 6410, Manual rear coupler; 6648-500 / 80R28 IMP 176A8 SFT TL (MITAS) - width 3.45 m; 6777-IF800 / 65R32 CFO 178A8 (only Michelin) - width 3.80 m; 7714-Special Transport sticker, 8133-Right exterior mirror, 8525 -Nyzhniy protection fan and auger; 8649-pneumatic compressor installed from the factory; 8701, engine block heater - 220 volt8709 fuel separator posylenyy9049 Directory spare parts; 9425-concave rod increased wear resistance, large wire-9427 concave; 9433-Sectional overhead concave plate; 9435-Overhead concave plate, 9663-preferred brand Michelin, 9665-preferred brand Mitas - rear tire, wheel spacers 9669, 96 mm at the front wheels, Brand: Deere & CompanyTorhovelna Brand: JOHN DEEREKrayina production: DE "
    Origin Country
    GERMANY
    Importer Name
    ****
    Quantity
    1
    Unit
    UA204010
    Net Weight
    19100
    Total Value [USD]
    192558.4671
  • Shipment Record 2
    Date
    28/Apr/2017
    HS Code
    7320101100
    Product Description
    1.Resory sheet, plate, polueliptychnoho type produced in the hot state spring steel for motor vehicle bus ZAZ type A07 chassis TATA LP 613/38 (Euro-II): rear spring to collect 264132400110-16sht, back in the spring 264132400110-16sht collection, back in the congregation 264132400110-16sht spring, spring back to collect 264132400110-16sht, front spring in the collection of m'yakymprohynom -8sht, front spring in the collection of m'yakymprohynom 264332100107-8sht, complete with front resorau m ' which 264332100107-8sht bending, the front spring in the collection of soft deflection 264332100107-8sht, front spring assembly in the normal deflection 2643321001 09-8sht, front spring assembly in the normal deflection 264332100109-8sht, front spring assembly in the normal deflection 264332100109-8sht, front spring assembly in the normal deflection 264332100109-8sht.Vyrobnyk TATA MOTORS LIMITED. Trade mark TATA MOTORS. Country of IN. .
    Origin Country
    INDIA
    Importer Name
    ****
    Quantity
    0
    Unit
    UA112080
    Net Weight
    7160
    Total Value [USD]
    18142.09377
  • Shipment Record 3
    Date
    28/Apr/2017
    HS Code
    8703239033
    Product Description
    "1. The car with an internal combustion engine with spark ignition with crank mechanism (petrol), which was in use - 1am: Brand Car - BMW; Model car - X5; body number (VIN) - 5UXZV4C51DL992966; engine room - no data number chassis - not available, the total number of seats, including the driver - 5; purpose - to transport people; cylinder capacity engine - 2979sm3, power output - 225kVt, axle configuration - 4x4, calendar year ( release) - 2012., model year - 2013., body type - niversal, color - white, Car damaged, whack, broken and damaged, door front right, inner lining the front right door fixing belt safety front right, door rear right, center pillars complete with threshold right pad right, hinge supports right module controls the right side impact, head airbag Passenger front, rear head airbag Passenger, pass the security front right, rear right security pass, inner lining the roof, plastic plate right rear arches on dkrylok right rear arches. Scratches, dents, chipped around the perimeter of the container body avtomobilya.Vyvantazheno MSKU0669727. Trade mark - BMW. Manufacturer - BMW. Country of origin - USA, US. "
    Origin Country
    UNITED STATES
    Importer Name
    ****
    Quantity
    1
    Unit
    UA500630
    Net Weight
    2249.82
    Total Value [USD]
    10269.99991
  • Shipment Record 4
    Date
    28/Apr/2017
    HS Code
    8703239031
    Product Description
    "1.Poshkodzhenyy, passenger vehicle to transport people and for the use of public Podoroga engin Mr. iskrovym internal combustion and ignition of the crank mechanic nizmom (petrol) was uvykorystanni brand HONDA, model CR-V - 1pc. Engine Room - no data, according to expert opinion №6216 28.04.2017r .: stamp "" Honda "", model "" CR-V "", in the configuration "" EX-L "" VIN 5J6RM4H74FL053452 engine room - no data, typdvyhuna - petrol, V-2354sm3, power - 140kVt environmental class - Euro 5, the total number of seats, including the city istse driver - 5 calendar rikvyhotovlennya - 2015, model year - 2015, the body - wagon, wheel formula 4x4, color - black. vehicles damaged. According eksperta№6216 conclusion of 28.04.2017r., damaged and should be replaced: • by data [3] naavtomobili necessary to replace the front suspension right (poz.7054, 7082, 7088, 7102, 7106, 7118), the front suspension subframe (7011), with vidkolesa front right (7036), ABS sensor front right wheels (7246) , front suspension stabilizer law (7272), the thrust steering rights (7312), crankcase engine (8065), in Pop trumpet average (8826). • front bumper (0283) strain in right and left parts to form bends, cracks materialukriplen, be replaced. • the lower part of the front bumper (0282) - in praviychastyni schesa material (according to [8] repairs not provided) must be replaced. • Protection of the lower front bumper (0835) - on the right side schesa material (according to [8] repairs not provided) polezhytzamini. • grill grille (0424) - on the right side vidsutniysektor (according to [8] repairs not provided), lie down replacement. • oblytsyuvannyahromovana grille (0437) - crack the material (according to [8] unexpected repair), lie down replacement. • headlight Law (0562) - cracked material fasteners (according to [8] repairs not provided), lie down replacement. • wing front right (0742) - it is difficult to form misshapen dents, creases metal polezhytzamini. • Cover the front right wing (0788) - schesa material (according to [8] repairs not provided), lie down replacement. • Protection of wheel arches perednohopravoho (0842) - crack the material at the bottom (according to [8] unexpected repair) must be replaced. • Hood (0471) in front of a deformed with formation of dents metal beyond repair and then color • dveriperedni law (1482) - in the back of the door frame deformation, polezhytzamini. • stable central sidewall Right (2292) seredniychastyni deformed in the form of dents, bends metal, with podalshymzabarvlennyam be repaired. • resistant front right sides (2238) in seredniychastyni deformed to form dents metal beyond repair and then color. • lining the lower right rear door (1986) in front of a deformed with formation of cracks material (according to [8] repairs not provided) pidlyahayezamini. • plate glass exterior rear doors "
    Origin Country
    UNITED STATES
    Importer Name
    ****
    Quantity
    1
    Unit
    UA807190
    Net Weight
    2100
    Total Value [USD]
    7737.819847
  • Shipment Record 5
    Date
    27/Apr/2017
    HS Code
    7326199090
    Product Description
    "1. The products of stainless steel, stamped without further processing: - plate vytysnyuvacha stuffing, article 286595 in the amount of 1 pieces. It is soboyurozsuvnu right front leg, which is part of the automatic double klipsatoraSP 18/15 (Clipsators designed for packing sausages) , intended to supply a unit klipsuvannya and holding the button sausages during zatyskuklipsy, as well as its movement after surgery upakovky.- plate vytysnyuvacha stuffing, article 286596 in the amount of 1 pieces. it is soboyurozsuvnu right rear leg, which is part astynoyu dual automatic klipsatoraSP 18/15 (Clipsators designed for packaging sausage), intended to supply a unit klipsuvannya and holding the button sausages during zatyskuklipsy, as well as its movement after surgery upakovky.- plate vytysnyuvacha stuffing, article 286597 in the number 1 pc. It is soboyurozsuvnu left front leg, which is part of the automatic double klipsatoraSP 18/15 (Clipsators designed for packaging sausage), intended to supply a unit and holding the button klipsuvannya cowboys asnoho product during zatyskuklipsy, as well as its movement after surgery upakovky.- plate vytysnyuvacha stuffing, article 286598 in the amount of 1 pieces. Predstavlyaetsoboy razdvyzhnuyu zadnyuyu lion paw, kotoraja there chastyu dvoynohoavtomatycheskoho Clipsators SP 18/15 (Clipsators prednaznachena for upakovkykolbasnыh of products) prednaznachena for submission to the node klypsovanyya and uderzhanyyabatona Kolbasna Fixing IN TIME klypsы clips, as well as ego Peremeschenye poslezavershenyya packaging operations. Material: Stainless steel. Method of manufacturing: stamping. Company manufacturer: "" Tipper Tie Alpina "". Trademark: "" Tipper Tie "". Country of origin: (CH) Switzerland. "
    Origin Country
    SWITZERLAND
    Importer Name
    ****
    Quantity
    0
    Unit
    UA100200
    Net Weight
    1.2
    Total Value [USD]
    732.2329082
  • Shipment Record 6
    Date
    27/Apr/2017
    HS Code
    7326909490
    Product Description
    "1.VYROBY ferrous metal stamped: FOR MACHINE TYPE HB # 0908584: - ART. 31 September 0700 LOWER STEEL CHASTYNANAPRAVLYAYUCHOYI chain, is a rectangular plate dimensions 96 * 815 MMTOVSCHYNOYU 10 mm intended for attachment to the frame easel in the manufacture of the workpiece to PARQUET -2SHT, art. 09 33 2100 STEEL delighted chain conveyor, is a plate of 60 * 40 * 30 mm to 10 mm with a hole in the center, designed for mounting to a chain -4 VT planers FOR TYPE VH-120 number 1908220: - ART.39 47 2600 grooved ring for pressure rollers - 3 pieces. With slot groove for POSA CI external to the shaft. DIAM.150 MM internal. DIAM.100 mm, 30 mm, is designed for pressing and transporting Parquet billets on the table in the processing area FOR planers - FOR MACHINE TYPE PAKUE number 208394 -120: - ART.02 67 2600 ring for smooth feeding roller -1 units. From filling the slot for landing on external shaft. DIAM.100 MM internal. DIAM.30 mm, 30 mm, is designed to press AND Tran SPORTUVANNYA Parquet billets on the table in a zone handling for planers - ART.02 67 2500 grooved ring for pressure VALYKIV- 3 pcs. From filling the groove for planting in Val external. DIAM.150 MM internal. DIAM.30 mm, 30 mm, is designed for pressing and transporting Parquet billets on the table in the processing area FOR planers - for machines TYPE S-4. # 5011146: - ART.50 15 2013 Mechanical SET BEFORE steel plate saw blade, is the plate 210 * 60 * 10mm with two holes O6 FOR FIXING-2 units used as PRYZHYMNA slats under which glides PROCESSING - ART 50 15 2200 LEFT lateral sides, is a plate of 185 * 30 * 10mm with two holes O6 FOR FIXING 2 PCS is used as PRYZHYMNA slats on which slides ZAHOTOVKA- ART. 50 15 5600 BASIS rear LIVAYAVLYAYE a rectangular steel plate 100 * 1180 * 10 mm, with six holes O10MM the center for attachment to the frame easel on the left, 2 pieces used for SLIDING piece in OBROBKY- AREA ART. 50 15 5700 POLZUNOK ZZADNIY, right, is a rectangular steel plate 100 * 1180 * 10 mm, with three holes O10MM for attachment to the frame easel on Human VT-2 - ART. 5000 50 15 Supporting plate beneath the slider, right, is a rectangular steel plate 350 * 250 * 10 mm with two holes for attachment to O10MM frame easel on which in turn are fixed PRYZHYMNI moving line of -2 PCS MANUFACTURER "" GEBR.SCHRODER GMBH & CO KG "" Country of Germany DE "
    Origin Country
    GERMANY
    Importer Name
    ****
    Quantity
    0
    Unit
    UA206070
    Net Weight
    52.05
    Total Value [USD]
    4343.299055
  • Shipment Record 7
    Date
    26/Apr/2017
    HS Code
    8433510000
    Product Description
    "1. samohidnyymarky harvester John Deere, notcontains that incorporates transmitters tapryymachi: Model S670 COMBINE, novyy.Seriynyy (identification) number / nomer1Z0S670ACHA106210, number dvyhunaRG6090G025924. Calendar year 2017rik.Modelnyy 2017rik.Komplektatsiya year: 0166 Made-to Ukraine, 0433-manual in Russian; 0507 package for cereals; 0600-No package; 1101-Cab Deluxe, 1220-seat on pnevmopodushtsi, 1370-Standard package lighting 1411-Preparations for the installation of the receiver, the 1600 fire extinguisher missing , 1803-Training and the AutoTrac with Harvest Monitor, Display 1825 GreenStar; 188J-JDLink Connect - 1 year, 50 hours JDLink Access.1950-No Harvest Mobile; 2052-3-speed transmission, 2220, front-wheel drive, 3054-Increased driving system variable speed, 4300-Small grain wire concave; 4832-upper sieve and sieve with dual control system, 4885-The configuration of the rotor variable Stream; 5232-standard system of grain transportation; 5373-Electric drive assembly grain bin; 5426-Vyvantazhnyy screw from removed housing that is mounted dealer length 6.9 m, 5756-system grinding crop residues Deluxe- spreader Sol We PowerCast, 6410, Manual rear coupler; 6648-500 / 80R28 IMP 176A8 SFT TL (MITAS) - width 3.45 m; 6777-IF800 / 65R32 CFO 178A8 (only Michelin) - width 3.80 m; 7714-Special Transport sticker, 8133-Right exterior mirror, 8525 -Nyzhniy protection fan and auger; 8649-pneumatic compressor installed from the factory; 8701, engine block heater - 220 volt8709 fuel separator posylenyy9049 Directory spare parts; 9425-concave rod increased wear resistance, large wire-9427 concave; 9433-Sectional overhead concave plate; 9435-Sektsyiyni concave cap (set of three); 9663-preferred brand Michelin, 9665-preferred brand Mitas - rear tire, wheel spacers 9669, 96 mm at the front wheels, Brand: Deere & CompanyTorhovelna Brand: JOHN DEEREKrayina production: DE "
    Origin Country
    GERMANY
    Importer Name
    ****
    Quantity
    1
    Unit
    UA204010
    Net Weight
    19100
    Total Value [USD]
    191962.6299
  • Shipment Record 8
    Date
    26/Apr/2017
    HS Code
    8714100000
    Product Description
    1. Parts and devices mototsykliv.-art.2S3-23135-00 plug front fork, motorcycle -1sht. art.4B1-15113-00-metal-plate-1sht. art.2BS-12210-01 timing chain tensioner, motooleru -1sht.-art.5EB-23125-00 plug front fork, metal, motorcycle -1sht.-art.5VY-22151-10 Overlay marine plastic chain, rear pendulum motorcycle -1sht.-art.4GY-22151-00 Overlay marine plastic chain, pendulum--1sht. art.5VU small weight-17632-00 CVT--1sht. art.5VU-17653-00 Slider variator plastic -4sht. art.90891-20300-mounting kit steering, black MT / FZ09 , XSR900 -2kompl.-kit for art.90891-20303 riplennya steering, MT09 / FZ09 (2017) -1kompl. art.90891-20301-mounting kit steering, titanovyy MT / FZ09, XSR900 -3kompl. art.90891-20302-mounting kit steering, MT09TR / FJ09 -4kompl.Krayina production - JPTorhovelna mark - YamahaVyrobnyk - Yamaha Motor Europe NV.
    Origin Country
    JAPAN
    Importer Name
    ****
    Quantity
    0
    Unit
    UA125180
    Net Weight
    4.489
    Total Value [USD]
    273.6908974
  • Shipment Record 9
    Date
    25/Apr/2017
    HS Code
    8707909000
    Product Description
    1.Povnistyu equipped double cabin with integrated truck frame DAIMLERCHRYSLER brand, model - 213 CDI, WDB9026221R198635 body identification number, a number 1 thing the calendar year 2000, used, body type flatbed truck, number of doors - 3. at no body assembly, engine in the assembly, front and rear suspension, transmission, exhaust system, transmission, ignition system, fuel system, fuel tank, fuel pump, battery, front and rear lighting with frets, front, rear direction indicators, expansion tank cooling system, radiator, steering wheel, steering rack, air conditioning, plate measuring devices. .
    Origin Country
    GERMANY
    Importer Name
    ****
    Quantity
    1
    Unit
    UA206030
    Net Weight
    1500
    Total Value [USD]
    2343.167878
  • Shipment Record 10
    Date
    24/Apr/2017
    HS Code
    8508700000
    Product Description
    1.Povnistyu staffed body truck brand MERCEDES-BENZ, SPRINTER model, body WDB9036631R887382 identification number, a number 1 thing the calendar year 2006, used, body type, cargo refrezhyrator, door number 5. On the back there are no assembly, engine in the assembly, front and rear suspension, transmission system exhaust, transmission, ignition system, fuel system, fuel tank, fuel pump, battery, front and rear lights, front and rear boards turns the cooling system expansion tank, radiator, steering wheel, steering rack, air conditioning, plate measuring devices. .
    Origin Country
    CHINA
    Importer Name
    ****
    Quantity
    0
    Unit
    UA100120
    Net Weight
    27
    Total Value [USD]
    634.5000408
Load more
1 2345Next GoTo:

Rear End Plate Import Data Sample with Importer and Exporter Name

Rear End Plate Importer Sample

img
img
Date 29/Apr/2017
Importer Name "ТОВ ""Агросем"""
Importer Address
04210, м. Київ, пр. Героїв Сталінграда, буд. 6A, Україна.
Exporter Name John Deere international GmbH
Product Description
"1. samohidnyymarky harvester John Deere, notconta.........
HS Code8433510000Value 192558.4671
Quantity 1Unit UA204010
Net Weight 19100
Origin Country GERMANY
 

How Our Trade Data Will Help To Grow Your Business?

Analyse market size of
Ukraine.
Find genuine Ukrainian buyers & suppliers for your product.
Stay updated with market price of Rear End Plate.
img
Track shipments of your competitors in Ukraine.
Identify new business opportunities in Ukrainian market.
Discover market share of Ukrainian Rear End Plate companies.
  • Analyse market size of Ukraine.
  • Find genuine Ukrainian buyers & suppliers for your product.
  • Stay updated with market price of Rear End Plate.
  • Discover market share of Ukrainian Rear End Plate companies.
  • Identify new business opportunities in Ukrainian market.
  • Track shipments of your competitors in Ukraine.

Customs Data

Analyse Ukrainian Market from Our Customs Trade Data

Our Rear End Plate Import Data of Ukraine covers Ukrainian Buyers, Foreign Suppliers and other customs-based details including – Price, Value, Quantity, HS Code, Product Description, Port, Origin & Destination Country, etc. This helps importers, exporters, logistics companies, financial institutions and other corporate agencies to know market share of companies and do proper market analysis of Rear End Plate importing into Ukraine. How our Ukraine Import Data of Rear End Plate and Market Research Report are beneficial? Let’s understand from the following points:


  • Identify 100% genuine Importers of Rear End Plate in Ukraine.
  • Track shipments of Ukrainian traders and analyse your competition level.
  • Know market price of Rear End Plate in Ukraine to take workable business decisions.
  • Analyse market size of products on specifications like brand, model, variety, category, etc.

Subscribe for Rear End Plate Import Data of Ukraine

Fill up the quick enquiry form to get the sample Report of rear end plate import.


  +91-11-47048012

  info@exportgenius.in