Ukraine Import Data of Blown | Ukraine Import Statistics of Blown

Find latest 2017 Ukraine import data of blown collected from Ukraine customs. Check Ukraine trade statistics of blown imports.
 

28 Records (Demo)

Import Shipment Records Found

Select Date

DateHS CodeProduct DescriptionOrigin CountryQuantityUnitNet WeightTotal Value [USD] Importer Name
28/Apr/20178544429091"1.Zapasni parts for blow molding machines for beverage production line at the plant", "Coca-Cola Beverages Ukraine Limited" ": -5324988.Kabel management controller mashyny.Dlya blown-voltage 24V. 1sht.-5324954.Kabel management controller blow molding machines .For 24V.-voltage 1sht.Vyrobnyk: "" HUSKY Injection Molding System SA "". Trademark: "" HUSKY "". Country of origin - DE.. "GERMANY0UA1002002.581038.917908 ***** 16 More Columns Available along with Company Name and Other Details etc.
28/Apr/201787082990001.Obihrivachi air and non-electrical parts for motor vehicle bus ZAZ type A07 chassis TATA LP 613/38 (Euro-II): Dvoynykh heater with fan 24V 99267383001L-8 pieces, Dvoynykh heater with fan 24V 99267383001L-8 pieces, with heater Dvoynykh fan 24V 99267383001L-8 pieces, Dvoynykh heater with fan 24V 99267383001L-8 pieces, panel heater with bracket 8 pieces 99267360069R-panel heater with bracket 8 pieces 99267360069R-panel heater with bracket 8 pieces 99267360069R-panel heater with bracket 99267360069R-heating 8sht.Vykorystovuyetsya passenger compartment heating and dodatovoho ing place vodiya.Skladayetsya basic parts: housing, heater and radiator grilles ventylyatora.Mayut output directional heat flow. Heated air is through coolant dvyhuna.Pryntsyp of heaters, circulating coolant from the engine is fed into Radiators, heating yoho.Razom this fan drives air through the radiator cool ovarian cancer, so there is teploobmin.Radiator gives off heat the air, and the air cooling radiator. After povitryavody warm air is blown into the cabin and the cooling fluid back into the motor vehicle to its oholodzhennya.Panel heater is a special Device located on the instrument panel inside the vehicle. Changes position Lever control panel regulated power napryamokta flow of warm air, which must be submitted in salon.Vyrobnyk TATA MOTORS LIMITED. Trade mark TATA MOTORS. Country of IN.INDIA0UA112080641.63010.44504 *****
27/Apr/20178484100090"Laying PRE-1-08H18N10 / LGN-165x145x3,0 -4sht, Construction RCD-1-08H18N10 / LGN-165x145x3,0 with welded partition -4sht, Construction RCD-1-08H18N10 / LGN-235x219x3,0 -6sht, Construction PRE-1-08H18N10 / LGN-235x219x3,0 the T-shaped baffle, welded 8mm -6sht, Construction RCD-1-08H18N10 / LGN-293x273x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-of 293x273x3,0 T-wall welded 10 mm -2sht, Construction RCD-1-08H18N10 / LGN-344x324x3,0 of T-wall welded 10 mm -4sht, Construction RCD-1-08H18N10 / LGN-350x330x3,0 with welded partition -4sht , Construction RCD-1-08H18N10 / LGN-760x734x10? 3,0 with Weld bulkhead -1sht, Construction RCD-1-08H18N10 / LHN- 832x800x3,0 -5sht, Construction RCD-1-08H18N10 / LGN-832x800x10x3,0 the T-shaped baffle, welded -1sht, Construction RCD-1-08H18N10 / LGN-940x900x3,0 -1sht, Construction RCD-1-08H18N10 / LGN -1000x970x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1051x1019x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1140x1100x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-11 40x1100x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-1148x1116x10x3,0 with integrated wall -6sht, Construction RCD-1-08H18N10 / LGN-1232x1200x3,0 -2sht, Construction RCD-1- 08H18N10 / LGN-1232x1200x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-12 40x1200x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1240x1200x10x3,0 with integrated T-shaped partition -4sht, Construction RCD-1-08H18N10 / LGN-1332x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN -1340x1300x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1350x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1437x1397x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1440x1400x3 0 -1sht, Construction RCD-1-08H18N10 / LGN-1440x1400x10x3,0 with integrated wall -1sht, Construction RCD-1-08H18N10 / LGN-1550x1500x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1550x1500x10x3,0 with integrated cross-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-blown integrated with 1640x1600x10x3,0 odkoyu -6sht, Construction RCD-1-08H18N10 / LGN-1665x1600x3,0 -2sht, trade mark: Impuls Energo sroVyrobnyk: Impuls Energo sroKrayina production CZ. "CZECH REPUBLIC0UA10008045.229629.24721 *****
26/Apr/20178538909900"1.Vizok-rozyednuvach automatically switch art.59433-2sht, art.59477-2sht, Vtychni contacts to high-acha vymyk zkriplennyam, art.59396-2k, and (po3sht), Head button switch (metal / plastic) art .ZB6Z1B-15sht, head button switch with LED indicator (metal / layer ik) art.ZB4BW363-1sht, additional klemmnyj unit for starter (metal / pVC) art.LUFN11- 1pc, screws final avt.vymykacha (metal / plastic) art.XCSZ03-10sht, Z'yednuv tial block for avtomat.vymykacha (metal / pVC) art.GV2AF3-5sht, cassette to switch Evolis High-tnoho in kompl.zshynoyu ground and Protective iNTO Kami (metal /pvh),art.59317-19sht, Komplektdlya Comte ktora (mechanical + Electric Lock + tire) art.LAD9R1V-10pc, Set Connect yuchennya avt.vymykacha (+ tips blown DKI) (metal / PVC), art .LV431563-4k, and (3 pieces), contact to the switch unit (metal / pVC) art.ZBE102-95sht, art.ZBE101-30sht, al t.ZBE101-30sht Corps buttons (metal / plastic teak) art.ZB4BZ102-5sht, art.ZB4BZ102-2sht, the opening mechanism for the highly shtorokkasety to ovoltnoho switch (metal) art.59435-2sh t Mounting panel (metal) for avt.vymyk acha art.03502-1sht, panel mounting ( metal) for rozpodilchohoschyta, art.NSYMM66-1sht, art.03170-2sht, circuit board A relay vrozpod.shafu (metal) art.LA7D902-14sht, Mont tazhnyy kit for contactors (metal / PVC) art.GV7AC08-4sht, Basis for buttons art.ZB4BZ009-40sht, distribution cabinet, understaffed equipment, art.NSYS3D1063 0P-3pc, distribution panels, neukomplektov anyy equipment, art.08109-1sht, pen (tal IU / plastic) for vymykachaart.59449-8sht.Krayina production - FR.Torhovelna mark - SCHNEIDER ELECTRIC.Vyrobnyk- "" SCHNEIDER ELECTRIC INDUSTRIES SAS "". "FRANCE0UA100010166711486.84289 *****
26/Apr/20178475900000"1.Chastyny ​​equipment for the production of glass bottles 1.0l Zeichnen Water: presholivka (material: iron) -30sht, throat ring (material: Bronze) -50sht, insert throat ring (material: dameron) -50sht; plunger (material: iron) - 28sht, funnel (material: iron) -22sht, blown head (material: iron) -22sht; Trademark: ORI-MOULD Manufacturer: SUZHOU ORI-MOULD TECHNOLOGY CO., LTDKrayina production: CN. "CHINA0UA80721015412323.38429 *****
25/Apr/20174203300000"Laying PRE-1-08H18N10 / LGN-165x145x3,0 -4sht, Construction RCD-1-08H18N10 / LGN-165x145x3,0 with welded partition -4sht, Construction RCD-1-08H18N10 / LGN-235x219x3,0 -6sht, Construction PRE-1-08H18N10 / LGN-235x219x3,0 the T-shaped baffle, welded 8mm -6sht, Construction RCD-1-08H18N10 / LGN-293x273x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-of 293x273x3,0 T-wall welded 10 mm -2sht, Construction RCD-1-08H18N10 / LGN-344x324x3,0 of T-wall welded 10 mm -4sht, Construction RCD-1-08H18N10 / LGN-350x330x3,0 with welded partition -4sht , Construction RCD-1-08H18N10 / LGN-760x734x10? 3,0 with Weld bulkhead -1sht, Construction RCD-1-08H18N10 / LHN- 832x800x3,0 -5sht, Construction RCD-1-08H18N10 / LGN-832x800x10x3,0 the T-shaped baffle, welded -1sht, Construction RCD-1-08H18N10 / LGN-940x900x3,0 -1sht, Construction RCD-1-08H18N10 / LGN -1000x970x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1051x1019x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1140x1100x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-11 40x1100x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-1148x1116x10x3,0 with integrated wall -6sht, Construction RCD-1-08H18N10 / LGN-1232x1200x3,0 -2sht, Construction RCD-1- 08H18N10 / LGN-1232x1200x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-12 40x1200x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1240x1200x10x3,0 with integrated T-shaped partition -4sht, Construction RCD-1-08H18N10 / LGN-1332x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN -1340x1300x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1350x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1437x1397x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1440x1400x3 0 -1sht, Construction RCD-1-08H18N10 / LGN-1440x1400x10x3,0 with integrated wall -1sht, Construction RCD-1-08H18N10 / LGN-1550x1500x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1550x1500x10x3,0 with integrated cross-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-blown integrated with 1640x1600x10x3,0 odkoyu -6sht, Construction RCD-1-08H18N10 / LGN-1665x1600x3,0 -2sht, trade mark: Impuls Energo sroVyrobnyk: Impuls Energo sroKrayina production CZ. "CHINA0UA1252302.25264.5475054 *****
24/Apr/20178421290000"1.Vizok-rozyednuvach automatically switch art.59433-2sht, art.59477-2sht, Vtychni contacts to high-acha vymyk zkriplennyam, art.59396-2k, and (po3sht), Head button switch (metal / plastic) art .ZB6Z1B-15sht, head button switch with LED indicator (metal / layer ik) art.ZB4BW363-1sht, additional klemmnyj unit for starter (metal / pVC) art.LUFN11- 1pc, screws final avt.vymykacha (metal / plastic) art.XCSZ03-10sht, Z'yednuv tial block for avtomat.vymykacha (metal / pVC) art.GV2AF3-5sht, cassette to switch Evolis High-tnoho in kompl.zshynoyu ground and Protective iNTO Kami (metal /pvh),art.59317-19sht, Komplektdlya Comte ktora (mechanical + Electric Lock + tire) art.LAD9R1V-10pc, Set Connect yuchennya avt.vymykacha (+ tips blown DKI) (metal / PVC), art .LV431563-4k, and (3 pieces), contact to the switch unit (metal / pVC) art.ZBE102-95sht, art.ZBE101-30sht, al t.ZBE101-30sht Corps buttons (metal / plastic teak) art.ZB4BZ102-5sht, art.ZB4BZ102-2sht, the opening mechanism for the highly shtorokkasety to ovoltnoho switch (metal) art.59435-2sh t Mounting panel (metal) for avt.vymyk acha art.03502-1sht, panel mounting ( metal) for rozpodilchohoschyta, art.NSYMM66-1sht, art.03170-2sht, circuit board A relay vrozpod.shafu (metal) art.LA7D902-14sht, Mont tazhnyy kit for contactors (metal / PVC) art.GV7AC08-4sht, Basis for buttons art.ZB4BZ009-40sht, distribution cabinet, understaffed equipment, art.NSYS3D1063 0P-3pc, distribution panels, neukomplektov anyy equipment, art.08109-1sht, pen (tal IU / plastic) for vymykachaart.59449-8sht.Krayina production - FR.Torhovelna mark - SCHNEIDER ELECTRIC.Vyrobnyk- "" SCHNEIDER ELECTRIC INDUSTRIES SAS "". "GERMANY0UA4000308.13249.6242441 *****
24/Apr/20178708999798"1.Vyroby sheet of plastic (polyurethane), remotely - Starting washer to reduce friction and compression blown form lock in the blowing-molding machines BLOMAX: lock washer blown form GTM-2036-015 IGLIDUR G - 400 sht.Krayina production: DE . Trade mark: "" KHS "". Producer: "" KHS GmbH "".. "UNITED STATES0UA20509025.16578.3981314 *****
24/Apr/20173212900090"1.Chastyny ​​equipment for the production of glass bottles 1.0l Zeichnen Water: presholivka (material: iron) -30sht, throat ring (material: Bronze) -50sht, insert throat ring (material: dameron) -50sht; plunger (material: iron) - 28sht, funnel (material: iron) -22sht, blown head (material: iron) -22sht; Trademark: ORI-MOULD Manufacturer: SUZHOU ORI-MOULD TECHNOLOGY CO., LTDKrayina production: CN. "SWITZERLAND0UA1251102.5E-5116.8221188 *****
20/Apr/201784195000001. Air cooler water. Designed for use as a heat exchanger in the cooling system injection caster for the production of PET preforms (using chilled water pump to cool tubkam in need of nodes). Does not contain refrigerant. It is a ribbed tubular heat exchange surface, which is located in a steel case and that the ambient air blown by fans mounted on the outer surface of the housing. Model GFH 090.1B / 2x4-N (D) -6G / 4P SN400 / 590457.0002 - 1am. that was in use (2004). The kit postachaetsya disassembled state for the purpose of transportation. Used to produce other goods and can not be used for production of conventional weapons, military or special equipment. .GERMANY0UA110110260012698.39992 *****
  • Shipment Record 1
    Date
    28/Apr/2017
    HS Code
    8544429091
    Product Description
    "1.Zapasni parts for blow molding machines for beverage production line at the plant", "Coca-Cola Beverages Ukraine Limited" ": -5324988.Kabel management controller mashyny.Dlya blown-voltage 24V. 1sht.-5324954.Kabel management controller blow molding machines .For 24V.-voltage 1sht.Vyrobnyk: "" HUSKY Injection Molding System SA "". Trademark: "" HUSKY "". Country of origin - DE.. "
    Origin Country
    GERMANY
    Importer Name
    ****
    Quantity
    0
    Unit
    UA100200
    Net Weight
    2.58
    Total Value [USD]
    1038.917908
  • Shipment Record 2
    Date
    28/Apr/2017
    HS Code
    8708299000
    Product Description
    1.Obihrivachi air and non-electrical parts for motor vehicle bus ZAZ type A07 chassis TATA LP 613/38 (Euro-II): Dvoynykh heater with fan 24V 99267383001L-8 pieces, Dvoynykh heater with fan 24V 99267383001L-8 pieces, with heater Dvoynykh fan 24V 99267383001L-8 pieces, Dvoynykh heater with fan 24V 99267383001L-8 pieces, panel heater with bracket 8 pieces 99267360069R-panel heater with bracket 8 pieces 99267360069R-panel heater with bracket 8 pieces 99267360069R-panel heater with bracket 99267360069R-heating 8sht.Vykorystovuyetsya passenger compartment heating and dodatovoho ing place vodiya.Skladayetsya basic parts: housing, heater and radiator grilles ventylyatora.Mayut output directional heat flow. Heated air is through coolant dvyhuna.Pryntsyp of heaters, circulating coolant from the engine is fed into Radiators, heating yoho.Razom this fan drives air through the radiator cool ovarian cancer, so there is teploobmin.Radiator gives off heat the air, and the air cooling radiator. After povitryavody warm air is blown into the cabin and the cooling fluid back into the motor vehicle to its oholodzhennya.Panel heater is a special Device located on the instrument panel inside the vehicle. Changes position Lever control panel regulated power napryamokta flow of warm air, which must be submitted in salon.Vyrobnyk TATA MOTORS LIMITED. Trade mark TATA MOTORS. Country of IN.
    Origin Country
    INDIA
    Importer Name
    ****
    Quantity
    0
    Unit
    UA112080
    Net Weight
    641.6
    Total Value [USD]
    3010.44504
  • Shipment Record 3
    Date
    27/Apr/2017
    HS Code
    8484100090
    Product Description
    "Laying PRE-1-08H18N10 / LGN-165x145x3,0 -4sht, Construction RCD-1-08H18N10 / LGN-165x145x3,0 with welded partition -4sht, Construction RCD-1-08H18N10 / LGN-235x219x3,0 -6sht, Construction PRE-1-08H18N10 / LGN-235x219x3,0 the T-shaped baffle, welded 8mm -6sht, Construction RCD-1-08H18N10 / LGN-293x273x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-of 293x273x3,0 T-wall welded 10 mm -2sht, Construction RCD-1-08H18N10 / LGN-344x324x3,0 of T-wall welded 10 mm -4sht, Construction RCD-1-08H18N10 / LGN-350x330x3,0 with welded partition -4sht , Construction RCD-1-08H18N10 / LGN-760x734x10? 3,0 with Weld bulkhead -1sht, Construction RCD-1-08H18N10 / LHN- 832x800x3,0 -5sht, Construction RCD-1-08H18N10 / LGN-832x800x10x3,0 the T-shaped baffle, welded -1sht, Construction RCD-1-08H18N10 / LGN-940x900x3,0 -1sht, Construction RCD-1-08H18N10 / LGN -1000x970x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1051x1019x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1140x1100x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-11 40x1100x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-1148x1116x10x3,0 with integrated wall -6sht, Construction RCD-1-08H18N10 / LGN-1232x1200x3,0 -2sht, Construction RCD-1- 08H18N10 / LGN-1232x1200x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-12 40x1200x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1240x1200x10x3,0 with integrated T-shaped partition -4sht, Construction RCD-1-08H18N10 / LGN-1332x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN -1340x1300x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1350x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1437x1397x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1440x1400x3 0 -1sht, Construction RCD-1-08H18N10 / LGN-1440x1400x10x3,0 with integrated wall -1sht, Construction RCD-1-08H18N10 / LGN-1550x1500x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1550x1500x10x3,0 with integrated cross-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-blown integrated with 1640x1600x10x3,0 odkoyu -6sht, Construction RCD-1-08H18N10 / LGN-1665x1600x3,0 -2sht, trade mark: Impuls Energo sroVyrobnyk: Impuls Energo sroKrayina production CZ. "
    Origin Country
    CZECH REPUBLIC
    Importer Name
    ****
    Quantity
    0
    Unit
    UA100080
    Net Weight
    45.2
    Total Value [USD]
    29629.24721
  • Shipment Record 4
    Date
    26/Apr/2017
    HS Code
    8538909900
    Product Description
    "1.Vizok-rozyednuvach automatically switch art.59433-2sht, art.59477-2sht, Vtychni contacts to high-acha vymyk zkriplennyam, art.59396-2k, and (po3sht), Head button switch (metal / plastic) art .ZB6Z1B-15sht, head button switch with LED indicator (metal / layer ik) art.ZB4BW363-1sht, additional klemmnyj unit for starter (metal / pVC) art.LUFN11- 1pc, screws final avt.vymykacha (metal / plastic) art.XCSZ03-10sht, Z'yednuv tial block for avtomat.vymykacha (metal / pVC) art.GV2AF3-5sht, cassette to switch Evolis High-tnoho in kompl.zshynoyu ground and Protective iNTO Kami (metal /pvh),art.59317-19sht, Komplektdlya Comte ktora (mechanical + Electric Lock + tire) art.LAD9R1V-10pc, Set Connect yuchennya avt.vymykacha (+ tips blown DKI) (metal / PVC), art .LV431563-4k, and (3 pieces), contact to the switch unit (metal / pVC) art.ZBE102-95sht, art.ZBE101-30sht, al t.ZBE101-30sht Corps buttons (metal / plastic teak) art.ZB4BZ102-5sht, art.ZB4BZ102-2sht, the opening mechanism for the highly shtorokkasety to ovoltnoho switch (metal) art.59435-2sh t Mounting panel (metal) for avt.vymyk acha art.03502-1sht, panel mounting ( metal) for rozpodilchohoschyta, art.NSYMM66-1sht, art.03170-2sht, circuit board A relay vrozpod.shafu (metal) art.LA7D902-14sht, Mont tazhnyy kit for contactors (metal / PVC) art.GV7AC08-4sht, Basis for buttons art.ZB4BZ009-40sht, distribution cabinet, understaffed equipment, art.NSYS3D1063 0P-3pc, distribution panels, neukomplektov anyy equipment, art.08109-1sht, pen (tal IU / plastic) for vymykachaart.59449-8sht.Krayina production - FR.Torhovelna mark - SCHNEIDER ELECTRIC.Vyrobnyk- "" SCHNEIDER ELECTRIC INDUSTRIES SAS "". "
    Origin Country
    FRANCE
    Importer Name
    ****
    Quantity
    0
    Unit
    UA100010
    Net Weight
    1667
    Total Value [USD]
    11486.84289
  • Shipment Record 5
    Date
    26/Apr/2017
    HS Code
    8475900000
    Product Description
    "1.Chastyny ​​equipment for the production of glass bottles 1.0l Zeichnen Water: presholivka (material: iron) -30sht, throat ring (material: Bronze) -50sht, insert throat ring (material: dameron) -50sht; plunger (material: iron) - 28sht, funnel (material: iron) -22sht, blown head (material: iron) -22sht; Trademark: ORI-MOULD Manufacturer: SUZHOU ORI-MOULD TECHNOLOGY CO., LTDKrayina production: CN. "
    Origin Country
    CHINA
    Importer Name
    ****
    Quantity
    0
    Unit
    UA807210
    Net Weight
    154
    Total Value [USD]
    12323.38429
  • Shipment Record 6
    Date
    25/Apr/2017
    HS Code
    4203300000
    Product Description
    "Laying PRE-1-08H18N10 / LGN-165x145x3,0 -4sht, Construction RCD-1-08H18N10 / LGN-165x145x3,0 with welded partition -4sht, Construction RCD-1-08H18N10 / LGN-235x219x3,0 -6sht, Construction PRE-1-08H18N10 / LGN-235x219x3,0 the T-shaped baffle, welded 8mm -6sht, Construction RCD-1-08H18N10 / LGN-293x273x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-of 293x273x3,0 T-wall welded 10 mm -2sht, Construction RCD-1-08H18N10 / LGN-344x324x3,0 of T-wall welded 10 mm -4sht, Construction RCD-1-08H18N10 / LGN-350x330x3,0 with welded partition -4sht , Construction RCD-1-08H18N10 / LGN-760x734x10? 3,0 with Weld bulkhead -1sht, Construction RCD-1-08H18N10 / LHN- 832x800x3,0 -5sht, Construction RCD-1-08H18N10 / LGN-832x800x10x3,0 the T-shaped baffle, welded -1sht, Construction RCD-1-08H18N10 / LGN-940x900x3,0 -1sht, Construction RCD-1-08H18N10 / LGN -1000x970x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1051x1019x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1140x1100x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-11 40x1100x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-1148x1116x10x3,0 with integrated wall -6sht, Construction RCD-1-08H18N10 / LGN-1232x1200x3,0 -2sht, Construction RCD-1- 08H18N10 / LGN-1232x1200x10x3,0 with integrated T-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-12 40x1200x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1240x1200x10x3,0 with integrated T-shaped partition -4sht, Construction RCD-1-08H18N10 / LGN-1332x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN -1340x1300x3,0 -6sht, Construction RCD-1-08H18N10 / LGN-1350x1300x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1437x1397x10x3,0 with integrated wall -2sht, Construction RCD-1-08H18N10 / LGN-1440x1400x3 0 -1sht, Construction RCD-1-08H18N10 / LGN-1440x1400x10x3,0 with integrated wall -1sht, Construction RCD-1-08H18N10 / LGN-1550x1500x3,0 -2sht, Construction RCD-1-08H18N10 / LGN-1550x1500x10x3,0 with integrated cross-shaped partition -2sht, Construction RCD-1-08H18N10 / LGN-blown integrated with 1640x1600x10x3,0 odkoyu -6sht, Construction RCD-1-08H18N10 / LGN-1665x1600x3,0 -2sht, trade mark: Impuls Energo sroVyrobnyk: Impuls Energo sroKrayina production CZ. "
    Origin Country
    CHINA
    Importer Name
    ****
    Quantity
    0
    Unit
    UA125230
    Net Weight
    2.25
    Total Value [USD]
    264.5475054
  • Shipment Record 7
    Date
    24/Apr/2017
    HS Code
    8421290000
    Product Description
    "1.Vizok-rozyednuvach automatically switch art.59433-2sht, art.59477-2sht, Vtychni contacts to high-acha vymyk zkriplennyam, art.59396-2k, and (po3sht), Head button switch (metal / plastic) art .ZB6Z1B-15sht, head button switch with LED indicator (metal / layer ik) art.ZB4BW363-1sht, additional klemmnyj unit for starter (metal / pVC) art.LUFN11- 1pc, screws final avt.vymykacha (metal / plastic) art.XCSZ03-10sht, Z'yednuv tial block for avtomat.vymykacha (metal / pVC) art.GV2AF3-5sht, cassette to switch Evolis High-tnoho in kompl.zshynoyu ground and Protective iNTO Kami (metal /pvh),art.59317-19sht, Komplektdlya Comte ktora (mechanical + Electric Lock + tire) art.LAD9R1V-10pc, Set Connect yuchennya avt.vymykacha (+ tips blown DKI) (metal / PVC), art .LV431563-4k, and (3 pieces), contact to the switch unit (metal / pVC) art.ZBE102-95sht, art.ZBE101-30sht, al t.ZBE101-30sht Corps buttons (metal / plastic teak) art.ZB4BZ102-5sht, art.ZB4BZ102-2sht, the opening mechanism for the highly shtorokkasety to ovoltnoho switch (metal) art.59435-2sh t Mounting panel (metal) for avt.vymyk acha art.03502-1sht, panel mounting ( metal) for rozpodilchohoschyta, art.NSYMM66-1sht, art.03170-2sht, circuit board A relay vrozpod.shafu (metal) art.LA7D902-14sht, Mont tazhnyy kit for contactors (metal / PVC) art.GV7AC08-4sht, Basis for buttons art.ZB4BZ009-40sht, distribution cabinet, understaffed equipment, art.NSYS3D1063 0P-3pc, distribution panels, neukomplektov anyy equipment, art.08109-1sht, pen (tal IU / plastic) for vymykachaart.59449-8sht.Krayina production - FR.Torhovelna mark - SCHNEIDER ELECTRIC.Vyrobnyk- "" SCHNEIDER ELECTRIC INDUSTRIES SAS "". "
    Origin Country
    GERMANY
    Importer Name
    ****
    Quantity
    0
    Unit
    UA400030
    Net Weight
    8.13
    Total Value [USD]
    249.6242441
  • Shipment Record 8
    Date
    24/Apr/2017
    HS Code
    8708999798
    Product Description
    "1.Vyroby sheet of plastic (polyurethane), remotely - Starting washer to reduce friction and compression blown form lock in the blowing-molding machines BLOMAX: lock washer blown form GTM-2036-015 IGLIDUR G - 400 sht.Krayina production: DE . Trade mark: "" KHS "". Producer: "" KHS GmbH "".. "
    Origin Country
    UNITED STATES
    Importer Name
    ****
    Quantity
    0
    Unit
    UA205090
    Net Weight
    25.16
    Total Value [USD]
    578.3981314
  • Shipment Record 9
    Date
    24/Apr/2017
    HS Code
    3212900090
    Product Description
    "1.Chastyny ​​equipment for the production of glass bottles 1.0l Zeichnen Water: presholivka (material: iron) -30sht, throat ring (material: Bronze) -50sht, insert throat ring (material: dameron) -50sht; plunger (material: iron) - 28sht, funnel (material: iron) -22sht, blown head (material: iron) -22sht; Trademark: ORI-MOULD Manufacturer: SUZHOU ORI-MOULD TECHNOLOGY CO., LTDKrayina production: CN. "
    Origin Country
    SWITZERLAND
    Importer Name
    ****
    Quantity
    0
    Unit
    UA125110
    Net Weight
    2.5E-5
    Total Value [USD]
    116.8221188
  • Shipment Record 10
    Date
    20/Apr/2017
    HS Code
    8419500000
    Product Description
    1. Air cooler water. Designed for use as a heat exchanger in the cooling system injection caster for the production of PET preforms (using chilled water pump to cool tubkam in need of nodes). Does not contain refrigerant. It is a ribbed tubular heat exchange surface, which is located in a steel case and that the ambient air blown by fans mounted on the outer surface of the housing. Model GFH 090.1B / 2x4-N (D) -6G / 4P SN400 / 590457.0002 - 1am. that was in use (2004). The kit postachaetsya disassembled state for the purpose of transportation. Used to produce other goods and can not be used for production of conventional weapons, military or special equipment. .
    Origin Country
    GERMANY
    Importer Name
    ****
    Quantity
    0
    Unit
    UA110110
    Net Weight
    2600
    Total Value [USD]
    12698.39992
Load more
1 23Next GoTo:

Blown Import Data Sample with Importer and Exporter Name

Blown Importer Sample

img
img
Date 28/Apr/2017
Importer Name "ІП ""Кока-Кола Беверіджиз Україна Лімітед"""
Importer Address
07442,Київська обл.,Броварський р-н,смт.Велика Димерка,вул.51-й км Санкт-Петербурзького шосе
Exporter Name HUSKY Injection Molding System S.A.
Product Description
"1.Zapasni parts for blow molding machines for bev.........
HS Code8544429091Value 1038.917908
Quantity 0Unit UA100200
Net Weight 2.58
Origin Country GERMANY
 

How Our Trade Data Will Help To Grow Your Business?

Analyse market size of
Ukraine.
Find genuine Ukrainian buyers & suppliers for your product.
Stay updated with market price of Blown.
img
Track shipments of your competitors in Ukraine.
Identify new business opportunities in Ukrainian market.
Discover market share of Ukrainian Blown companies.
  • Analyse market size of Ukraine.
  • Find genuine Ukrainian buyers & suppliers for your product.
  • Stay updated with market price of Blown.
  • Discover market share of Ukrainian Blown companies.
  • Identify new business opportunities in Ukrainian market.
  • Track shipments of your competitors in Ukraine.

Customs Data

Analyse Ukrainian Market from Our Customs Trade Data

Our Blown Import Data of Ukraine covers Ukrainian Buyers, Foreign Suppliers and other customs-based details including – Price, Value, Quantity, HS Code, Product Description, Port, Origin & Destination Country, etc. This helps importers, exporters, logistics companies, financial institutions and other corporate agencies to know market share of companies and do proper market analysis of Blown importing into Ukraine. How our Ukraine Import Data of Blown and Market Research Report are beneficial? Let’s understand from the following points:


  • Identify 100% genuine Importers of Blown in Ukraine.
  • Track shipments of Ukrainian traders and analyse your competition level.
  • Know market price of Blown in Ukraine to take workable business decisions.
  • Analyse market size of products on specifications like brand, model, variety, category, etc.

Subscribe for Blown Import Data of Ukraine

Fill up the quick enquiry form to get the sample Report of blown import.


  +91-11-47048012

  info@exportgenius.in